HobbyWireless
USB FLIGHT DATA RECORDER PRO (FDR-PRO-KIT)
| NEW | increased voltage and current accuracy |
| Web Site | http |
| BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, USB Flight Data Recorder Pro - Don't need wireless telemetry right now, or need an extra Pro recorder for multiple planes? This is the item you need. (FDR-PRO-KIT), Here are just a few of the scenarios in which our customers have directly benefited from Eagle Tree Flight Data Recorder Pro:, • Capturing high resolution airspeed and altitude data for L/D,, NEW: now has 4X the onboard memory of the original recorders, with lossless data compression, for much longer storage time., NEW: improvements in airspeed, altitude monitoring mean greater accuracy, and no interference from your model’s transmitter, E-mail:, sales@eagletreesystems.com,
For recording and after the flight PC playback of your ...HobbyWireless
OSD PRO EXPANDER
| Web Site | http |
| BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, The OSD Pro Expander is a powerful, modular, fully configurable Video/Audio On-Screen Display (OSD) device, providing graphics, voice announcements, alarms, acoustic variometer with total energy compensation, Home Arrow, Return to Home, Failsafe, “RADAR”, waypoints, a flight simulator for testing, and many other features. The information displayed can be as simple or advanced as you like, depending on how you configure the display, and on which optional Eagle Tree sensors are connected., All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:, , E-mail:, sales@eagletreesystems.com,
Click here to read the OSD Pro Manual (PDF). GPS ...HobbyWireless
BIG - T-REX 600 NITRO PRO KIT FIBERGLASS CANOPY
| 9.Main Gear Radio 8.5 | 1, 1500-2200 Rotor RPM. |
| Length | 1160mm |
| Height | 410mm |
| Main Blade Length | 600mm |
| Main Rotor Diameter | 1350mm |
| Tail Rotor Diameter | 240mm |
| Engine Pinion Gear | 20T |
| Autorotation Tail Drive Gear | 180T |
| Drive Gear Ratio | 8.1 |
| Flying Weight | Approx. 3200g |
Details:, 1.Both the T-Rex 600 Nitro and 600 Nitro Pro include a Beautiful factory painted fiberglass canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal., Specifications:, , Accessories:, , Radio transmitter and electronic equipment required for assembly:, Transmitter(6-channel or more, helicopter system),
2.Simple and light weight design provides awesome flight performance nearly ...HobbyWireless
RSSI BUFFER FOR OSD PRO
| Operating Voltage | 5VDC (powered by EagleTree eLogger). |
| Current Draw | 2 milliamps. |
| RSSI Voltage Range | 0 - 4.0 VDC. |
| RSSI Input ohms | > 1 megohms (DC). |
| Input Impedance | 330K ohms (AC). |
| Size/Weight | 0.45 x 0.73 inches (11 x 19 mm), 2 grams. |
| Operating Voltage | 5.0VDC (4.5 - 5.5 VDC allowed). |
| Current Draw | 2 milliamps. |
| RSSI Range | 0 - 4.0 VDC. |
| RSSI Input ohms | > 1 megohm. |
| RSSI Impedance | Input IN1 = 330K ohms @ 1KHz. |
| Size/Weight | 0.45 x 0.73 inches (11 x 19 mm), 2 grams. |
| can be used with other OSD designs if the 3-wire cable’s pinout is observed, as follows | Black Wire |
| Red Wire | Buffered RSSI signal output (to OSD) |
| White Wire | Not Used (no connection) |
Details:, The RSSI Buffer is a tiny-sized accessory that is used to connect a R/C receiver's analog RSSI (relative signal strength indication) signal to the EagleTree eLogger V3 / OSD Pro system. It uses the TEMP1 input on the eLogger V3 telemetry module., Specification and Features:, Installation Instructions:, Click Me!, Installation Video:, Click Me!, Cable Pin-Out Information:, , Note:, Common circuit ground is provided by the IN1 or IN2 signal ground connection. Please,
This RSSI buffer is recommended for all EagleTree OSD-Pro installations ...HobbyWireless
FY-30A PRO IMU FLIGHT STABILIZATION SYSTEM - BLACK ALUMINUM
| Download FY30A Firmware Upgrade Procedure | Click Here |
| Download USB TTL Cable Driver for Windows 7 | Click Here |
| Download USB TTL Cable Driver for Windows XP | Click Here |
| Download Firmware Uploading Software | Click Here |
| Download FY30A Firmware (.bin file) | Click Here |
| Rate | 4HZ per second. |
Details:, New firmware for fixed wind and Multi-Rotor aircraft., The FY-30A also has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit ca be turned on or off for the following functions:Level flight, Package Includes:, ● 1 x FY-30A Pro circuit board., FY-20A and FY-30A Pro Comparison:, , Data output available:, ,
Click here for firmware and instructions. Multi-rotor instructions can found ...HobbyWireless
TSLRS V6 PRO UHF TRANSMITTER - INCREASES THE RANGE OF RC RADIOS
| RF Power output | 0.5W or 1W or 2W. The 2W setting can now be used as long as you like. use selectable |
| Supply Voltage | 6-25V using internal switchmode converter also included inside the nice aluminium |
| Supply current | depends on input voltage, but input power is 3 times RF out power |
| Spurs | < 60dB and 80dB under carrier, improved new double low pass filter |
| Temperature range | -40C to +70C tested |
| Hitech Aurora 9, take out normal RF module and use module pins from left | 1=ppm, 2=supply, 3=GND (4 and 5 are not used) |
Details:, The New PRO version released Feb2012 is a improved version of the V5., Includes:, 1x Transmitter PRO V6 0.5-2W 433Mhz built in regulator,
New radio system, still compatible with older versions rx With ...HobbyWireless
V6 PRO 8W BOOSTER FOR 433MHZ DIGITAL SYSTEMS
| FEATURES of V5 | added safety and security |
Details:, Here is the NEW PA Booster version 6 PRO, again like on the TX, running temperature, materials, and improved, Different cable types have different loss, here is the max length allowed using different cables:, RG-58CU 18meters (59ft),
design has been the main goal of the new improved ...HobbyWireless
DJI - PHANTOM REPLACEMENT GO-PRO MOUNT
Details:, Go-Pro camera replacement mount for DJI Phantom,
HobbyWireless
GUARDIAN STABILIZATION SENSOR MODULE FOR OSD PRO
| Web Site | http |
| BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, Feather-light and about the size of a postage stamp, the inertial sensor based Guardian stabilization expander uses cutting edge inertial sensors and sensor fusion algorithms to provide world class stabilization to your fixed wing or elevon model. It’s a “Guardian Eagle” for your plane!, E-mail:, sales@eagletreesystems.com,
To stabilize your model, just mount the Guardian in a ...HobbyWireless
COMPLETE OSD PRO 150A 10HZ GPS AND AUTO-PILOT SYSTEM W/ WIRE LEADS - V4
| New | Artifical Horizon Display |
| Web Site | www.eagletreesystems.com/Support/support.html |
| BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, , Here are some examples:, * GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), Instruction Manual:, Click Me!, See the video below for an example of the AHI display tracking the horizon:, , Package Includes:, , E-mail:, sales@eagletreesystems.com,
We’re pleased to introduce the Eagle Tree OSD Pro.The OSD ...HobbyWireless
COMPLETE OSD PRO 100A 10HZ GPS AND AUTO-PILOT SYSTEM W/ CONNECTORS - V4
| New | Artifical Horizon Display |
| Web Site | www.eagletreesystems.com/Support/support.html |
| BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, , Here are some examples:, * GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), Instruction Manual:, Click Me!, See the video below for an example of the AHI display tracking the horizon:, , Package Includes:, , E-mail:, sales@eagletreesystems.com,
We’re pleased to introduce the Eagle Tree OSD Pro.The OSD ...HobbyWireless
COMPLETE OSD PRO 100A 10 HZ GPS AND AUTO-PILOT SYSTEM W/ WIRE LEADS - V4
| New | Artifical Horizon Display |
| Web Site | www.eagletreesystems.com/Support/support.html |
| BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, , Here are some examples:, * GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), Instruction Manual:, Click Me!, See the video below for an example of the AHI display tracking the horizon:, , Package Includes:, , E-mail:, sales@eagletreesystems.com,
We’re pleased to introduce the Eagle Tree OSD Pro.The OSD ...HobbyWireless
TOWER PRO SG-50 MICRO SERVO
| *Operating Voltage | 3.0V - 7.2V |
| *Operating Speed | 0.08sec/60 degrees at no load |
| *Stall Torque | 0.8kg/cm |
| *Motor Type | coreless motor |
| *Gear Type | All Nylon Gear |
| *Connector Wire Length | 150mm |
| *Dimensions | 20.9mm x 11.4mm x 22mm |
| *Weight | 5.0g |
Details:, , Item Descritpion:, , Specifications:, , Compatible with:,
Reliable and low cost micro servo the Tower Pro MG-50 ...HobbyWireless
TOWER PRO MG-90 MINI SERVO
| * Dimension | 26mm*13mm*24mm |
| * Operating Speed | 0.12sec/60degree(4.8V) |
| * Stall Torque | 1.6kg/cm |
| *Motor Type | coreless motor |
| *Gear Type | All Nylon Gear |
| *Connector Wire Length | 150mm |
Details:, , Item Descritpion:, , Specifications:, , * Weight:9G, Compatible with:,
Reliable and low cost servo the Tower Pro MG-90 has ...HobbyWireless
COMPLETE OSD PRO 100A 10 HZ GPS AND AUTO-PILOT SYSTEM W/ WIRE LEADS - V4 (OPEN BOX)
| New | Artifical Horizon Display |
| Web Site | www.eagletreesystems.com/Support/support.html |
| BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, , NOTE: A customer bought this kit and dry fit it together and decided he didn't want it afterall. Everything is here and everything works just like new. . It has not been installed and never flown., Here are some examples:, * GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), Instruction Manual:, Click Me!, See the video below for an example of the AHI display tracking the horizon:, , Package Includes:, , E-mail:, sales@eagletreesystems.com,
We’re pleased to introduce the Eagle Tree OSD Pro.The OSD ...